Textile Testing Methods - A Wet Processing Industry Requirement1420716

来自IntoRobot
跳转至: 导航搜索

A definite understanding quality parameters, the terminologies employed in textile testing instruments suppliers and passing a selected material, are all very crucial and important for every textile dyer, exporter and manufacturer.

The Textile processor should be aware of the parameters of buyer's requirements in quantitative terms and just he then may take necessary measures to achieve that standard. Textile processing is a vast ocean using numerous processes, chemicals, machinery and men.


An obvious cut policy on Quality Assurance and Quality control really are a must for just about any good wet processing industry. From the comfort of fiber to finished goods there are many inputs and outputs. A systematic qc procedure is vital to eradicate final quality problems of dyeing and finishing.

As an example the cotton fiber test - correctly maturity, staple length, color, moisture content etc determines what quality of ultimate yarn and thereafter the material, readily stored away planning to produce. The physical tests for example TPI, Tensile strength, CSP etc. and EPI and PPI foretell the caliber of yarn and fabric respectively.

The last quality of finished products could be assured if proper quality control measures are adopted in testing the incoming dyestuff and chemicals regularly. The process of doing these tests is though not really a complicated, an effective guidance is important.

Textile fabric or yarn before going for an additional phase of processing, eg., garmenting or weaving/knitting, must be tested for that required quality standards stipulated with the buyer. The tests like wash fastness, rubbing fastness, anti-staining properties, fireproof, water repellent etc need to be conducted within the in-house laboratory plus a prior assessment needs to be made before sending the product for Alternative party testing.